PCA GT2, GT3 and Cup Car SIG

PCA GT2, GT3 and Cup Car SIG (http://gt2gt3cup.org/index.php)
-   GT2, GT3, RS and Cup Car Discussions (http://gt2gt3cup.org/forumdisplay.php?f=2)
-   -   MovIt Carbon Silicon Carbide Rotors as PCCB Replacement? (http://gt2gt3cup.org/showthread.php?t=128)

Trackrat 05-07-2011 07:25 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Five hard track day follow-up. I set the second fastest time at the GG PCA TT with these rotors on the car. Much of the original honing marks still remain on the rotors. No obvious sign of wear.

LF

http://www.gt2gt3cup.org/picture.php...&pictureid=296

LR

http://www.gt2gt3cup.org/picture.php...&pictureid=295

RR

http://www.gt2gt3cup.org/picture.php...&pictureid=294

stujelly 05-07-2011 12:35 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
I spoke with Tom yesterday. What a great guy and the statistics that he has for the long lasting performance of the rotor and pads is just mind blowing.

Trackrat 05-07-2011 01:45 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Quote:

Originally Posted by stujelly (Post 1441)
I spoke with Tom yesterday. What a great guy and the statistics that he has for the long lasting performance of the rotor and pads is just mind blowing.

The holy grail is a long lasting, track usable rotor with good modulation characteristics. The next two months will tell the tale and so far so good. These seem tough as nails.

Can't wait to install the full kit with the billet calipers- MovIt are you reading this?? :-((

TRAKCAR 05-07-2011 03:12 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Wow, that's impressive for 5 days of wear.

Besides the pallet of tightly wrapped $100.00 bills they want for them, do you think they can be driven (COLD!!) on the street?
It would suck to drive over the mail man because you can't stop the car driving down the driveway..

Trackrat 05-07-2011 03:52 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Quote:

Originally Posted by TRAKCAR (Post 1452)
Wow, that's impressive for 5 days of wear.

Besides the pallet of tightly wrapped $100.00 bills they want for them, do you think they can be driven (COLD!!) on the street?
It would suck to drive over the mail man because you can't stop the car driving down the driveway..

Haha :D

Unlike driving on the street with P50 Greens these use the P40 pad so cold and or wet stopping is no different from hot.

Your question is spot on and the good news is they work just fine when cold.

TRAKCAR 05-07-2011 05:16 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Cool :thumbup: How are the pads lasting? Same as before still?

Trackrat 05-07-2011 09:38 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Quote:

Originally Posted by TRAKCAR (Post 1459)
Cool :thumbup: How are the pads lasting? Same as before still?

Yes, pretty much. I am getting 5 hard track days on fronts and rears with PSM on all the time.

As caliper is OE, still getting beveled fronts and rears but to a lesser extent.

TRAKCAR 05-08-2011 06:50 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Beveling 100% due to calipers then, I assume.

NickW 05-08-2011 09:44 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Tracker- sorry to be a pain, but are these direct OE sized replacements for both front/rear? Can you PM me the MSRP when you get the chance, I am quite interested in them.

lightweight 05-08-2011 09:48 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
According to Tom: once one is able to use MovIt pads there is a considerable increase in pad lifespan. 2 years of 20 days/year tracking currently being seen by a customer. Could be 3 years with light track use. And never needing to switch pads between track and street. This is sounding more and more interesting.

Trackrat 05-31-2011 10:44 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
MovIt brake update: Things have taken a turn for the worse with delays in the supply of another kit, lack of follow-through on parts and other severe "miscommunications" (I am trying to say it nicely) and I currently CANNOT recommend anyone to purchase any MovIt parts. Email or IM me for current situation if you are thinking of giving them any business.

FTS 05-31-2011 11:25 AM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Peter, I am sorry things are turning for the worse. Be patient, it may turn back around again; well at least I sincerely hope so.

Trackrat 06-27-2011 01:20 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
Quote:

Originally Posted by Trackrat (Post 2155)
MovIt brake update: Things have taken a turn for the worse with delays in the supply of another kit, lack of follow-through on parts and other severe "miscommunications" (I am trying to say it nicely) and I currently CANNOT recommend anyone to purchase any MovIt parts. Email or IM me for current situation if you are thinking of giving them any business.

Ok- update. MovIt and I patched things up. They addressed my issues and we are moving forward again in positive fashion and I give them full credit for being willing to step-up and address the challenges we had.

I will post a full review in a few more weeks but I can say the direct, drop-in replacement MovIt Carbon/Silicon/Carbide rotors have proven durable and a greatly superior to the OE PCCB rotors. After 15 track days they show no obvious wear and pedal modulation remains much better compared to PCCB. Furthermore pedal feel remains consistent throughout a full track session.

At this point it does seem as though this is the "Holy Grail" of rotors: non-wearing, excellent pedal feel and modulation. A lifetime rotor.

A full kit is still in progress, delays are due to testing, redesign and refinement of the kit. But the OE sized replacement rotors are showing to be bulletproof under very heavy use. I will be testing an oversized, 396mm kit as well within the next few weeks and will of course report on that when I have some experience.

stujelly 06-27-2011 11:00 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
That's great. Tom sure seemed very accommodating. I just cant afford the price. I am converting to steel oem and using the pagid yellow.

FTS 06-27-2011 11:03 PM

Re: MovIt Carbon Silicon Carbide Rotors as PCCB Replacement?
 
I am glad MovIt is cooperating, I hope the experiment keeps its positive spin.


All times are GMT -5. The time now is 07:11 PM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.

Garage vBulletin Plugins by Drive Thru Online, Inc.

©2010-2018, Porsche Club of America. This site is owned & operated by the Porsche Club of America, and is not affiliated in any way with Porsche AG or Porsche Cars North America.