'10 RS Dyno
1 Attachment(s)
With Sharky and unplugged, so if nything it should be down a bit on torque midrange.
|
Re: '10 RS Dyno
Woww, those are impressive numbers, how come they that high?
|
Re: '10 RS Dyno
FTS....because Reters car knows nothing but Flat Out!
|
Re: '10 RS Dyno
Torque peak occurs much earlier in RPM range than specs indicate. Can't complain about that.
|
Re: '10 RS Dyno
Izzone's dyno'ed his car this weekend and his numbers were about the same.
http://www.youtube.com/user/izzone74?ob=5 |
Re: '10 RS Dyno
I knew there was a reason you would blow by me. Hehe
|
Re: '10 RS Dyno
So...what was your break in proceedure....gentle on it till???miles or agressive street driving and then off to the track asap?
|
Re: '10 RS Dyno
I picked it up in Tampa and drove it to palm beach trying vary gears and engine speeds as much as possible while staying under 4K RPM. I think I accidentally revved it to about 6K a couple of time is the first 50 miles.
Only very gentle under 2500 with lots of shifting not to bog engine untill engine is hot. I always do that still. After the first 500 miles I went to Homestead and did 5 laps easy on street tires, the weekend after I went to Sebring short shifting at 7 7.5K RPM. Ran easy 2:23's (On Hoosiers), thinking a 2:19 was in the cards ;-) Dropped off at Orbit and changed all oils, bled brakes put SRF in, etc. etc. |
All times are GMT -5. The time now is 06:19 PM. |
Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.