|
GT2, GT3, RS and Cup Car Discussions Discussions on all topics related to all Porsche GT vehicles |
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
||||
|
||||
Re: GT3 RS 4.0 Official announcement and video
Let me add some additional information. If you quote any of this elsewhere, please respect this as original information and kindly provide attribution and a link back to this thread or you will be hunted down like the dog you are
Do not copy this post in its entirety to other forums or publishings please The new car is not an RSR on license plates and is not meant to be the new RS, and not meant to be a successor to the glorious RS 3.8 In reality the 4.0 project is meant to be a "good bye" edition to the 997 GT car era, based on an RS second gen. It still is an RS second gen., only with an "enriched RS flavor" by using parts of the 2RS and engine mods using the gained experience with the 4 Litre racemill. The very difficult engineering part was to get full 500 hp out of the engine and still keep it street legal........upping the displacement to 4 Liters would have only yielded 470 to 475 hp. The rest was hard engineering work: Crankshaft from RSR and Cup R (not derived, same part!), modified titanium rods, new intake manifold, heads with different cr than the RS 3.8, new airbox, new airfilter, less restrictive catalyst w. 300 cells, reinforced clutch, reinforced cam adjusters, reinforced chain tensioner, complete new ECU program and the list goes on. Result is an street legal normally aspirated engine with an honest 125 hp/l. That means 83 hp per cylinder.....compare that with any of the competition....durability is absolutely not affected, the engine is a tough as nails and will last, its really bulletproof. Throttle response is razor sharp, rev up dynamics better than ever despite the longer stroke, low end bite from 2000rpm on. Weight is 1360 kgs or even a little less, topped off with all fluids in the lightest spec. Lightweight bits from the 2RS but painted as gelcoat adds weight. Gear ratios same as RS 3.8 A pure Motorsports project, not influenced by marketing department. A new, less obtrusive look was sought hence the white and painted carbon bits. Very clean, almost innocent but still very racy and not aggressive. Huge fenders, RSR exhaust, etc etc equals a car that would never see the light of day as it could not be made street legal. Already difficult to make the GT cars fully street legal in USA. Last edited by FTS; 05-02-2011 at 08:09 AM. |
#2
|
||||
|
||||
Re: GT3 RS 4.0 Official announcement and video
Quote:
|
#3
|
|||
|
|||
Re: GT3 RS 4.0 Official announcement and video
Quote:
Razor sharp ... is the throw of the crank all that different, anyway? I wonder why anyone would consider a 4.0RS as anything other than an incremental successor to the 3.8RS just as the 3.8 was a successor to the 3.6RS -- large increments, but still exactly the same car at its core. Preuninger already claims "bulletproof" (cough) without so much as having the first production car turn a wheel ... does this mean they changed the coolant and power steering fittings? Gelcoat adds weight ... adds production costs for quality assurance and I have to wonder if the matt-finish CF on the GT2 RS received less than flattering comments from sight-unseen buyers. At what point does a white Porsche 911 with white wheels, a giant wing hanging above the rear with full body decals and PORSCHE in six inch lettering become an understated "innocent" or "socially acceptable" appearance? Not so much as one word about the steel rotors? Well, all that marketing nonsense aside, I think the engine will be a lot of fun and it's not hard to address the remaining shortcomings of this last 3RS. |
#4
|
||||
|
||||
Re: GT3 RS 4.0 Official announcement and video
Luv'em!
Kept it to one word - hope it's clear. |
#5
|
||||
|
||||
Re: GT3 RS 4.0 Official announcement and video
+ 1
Until they crack too much, but they are a consumable after all. |
|
|