Go Back   PCA GT2, GT3 and Cup Car SIG Forums > GT2/GT3/Cup Car Register Discussions > GT2, GT3, RS and Cup Car Discussions
Register Forums FAQs Search

GT2, GT3, RS and Cup Car Discussions Discussions on all topics related to all Porsche GT vehicles

Reply
 
Thread Tools Search this Thread Display Modes
  #16  
Old 04-27-2011, 01:22 PM
SH || NC's Avatar
SH || NC SH || NC is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 129
Downloads: 0
Uploads: 0
Default Re: Now Rotors After 3 Track Events...

Ahhh, the CLs prevent some of the standard solutions; I see.
__________________
GT3 & TT Owners - Fix Your Fittings! (link) (link) (link) (link)

Reply With Quote
  #17  
Old 05-08-2011, 06:47 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default Re: Now Rotors After 3 Track Events...

Quote:
Originally Posted by TRAKCAR View Post
The cracks are wider then on mine, but shorter.
I would be OK with these for another 3 days at VIR but order new ones for after that.

My car replaced fronts after 16 days and I have now 8 days on them 12 when I get back from Ratl and VIR in 2 weeks. I expect them to last about 20 days (Less Sebring on these), so in a couple of weeks I will be buying something slotted.

I've only run Pagid R29, replaced them at 50% or 6 days (Feels crappy) , but I hope to try endless next for longer better brake feel.
Just curious what rotors you are running now, and if you are changing, what brand are you planning to go to. I think rather than go down the 20k ceramic replacement I will go down the steel conversion road.

Thanks
Reply With Quote
  #18  
Old 05-08-2011, 09:01 PM
TRAKCAR's Avatar
TRAKCAR TRAKCAR is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 359
Downloads: 0
Uploads: 0
Garage
Default Re: Now Rotors After 3 Track Events...

Still running OEM, I have still 4-6 track days in them.
There are a few easy conversions I think from the OEM PCCB. It is not identical to steel.

I think AP as a ready to go solution for PCCB cars. It looks like I will switch rotors and pads to PFC as the CUP cars are running that this season = lots of testing, less expensive and good availability. Once I get them I will post what I learn.
__________________
Peter National PCA Instructor.
Pics and youtubes ==> Daily driver '10RS white/gold. White OEM RS roll bar, red schroth seat belts, CUP LSD, lip and Gurney, Sharky, V1, K40 laser blocker.

Sold '07GT3 white
Reply With Quote
  #19  
Old 05-10-2011, 10:23 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default Re: Now Rotors After 3 Track Events...

Quote:
Originally Posted by TRAKCAR View Post
Still running OEM, I have still 4-6 track days in them.
There are a few easy conversions I think from the OEM PCCB. It is not identical to steel.

I think AP as a ready to go solution for PCCB cars. It looks like I will switch rotors and pads to PFC as the CUP cars are running that this season = lots of testing, less expensive and good availability. Once I get them I will post what I learn.
Thats why I love this forum. I dont have to spend the money to learn what other people have already figured out.

From the info from my dealer the factor OEM steel rotor is a direct replacement for the PCCB. I plan on running the OEM rotors with the pagid p29's, that is unless something better comes along with out having to change calipers.

This little hobbie has become quite the adventure.
Reply With Quote
  #20  
Old 05-10-2011, 11:35 PM
TRAKCAR's Avatar
TRAKCAR TRAKCAR is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 359
Downloads: 0
Uploads: 0
Garage
Default Re: Now Rotors After 3 Track Events...

FRONT: OEM steel rotors +/- $1000.00 (Suncoast) last about 16 hard track days, Hats = discs cost +/- $2000.00, but replacement discs are $1000 afterwards but should last 2x or 3x longer.

OK, if they are interchangeable, but I have found this on Rennlist:
The rotor fits over the hub just fine. No issues with spacing or offset. The 997.2 GT3/RS steel front rotors are dimensionally identical to the 997.1 PCCB rotors in how they fit over the hub and align laterally (using the plane of the axle as the z axis) in the caliper.

The difference is the alignment in the horizontal, front to rear, or x axis of the caliper brake pad surface. The PCCB rotor is a true 2 piece design (consumable CC friction ring mounted to a reusable aluminum hat) while the 997.2 GT3/RS steel rotor is a one piece construction (steel friction ring wedded to an aluminum non reusable hat- see below).

Click the image to open in full size.

The alignment issue is a result of the void between the hat and the friction ring in the 997.2 GT3/RS steel rotor. With out shimming the caliper ~2.5mm away from this void the anterior (inner) brake pad surface would impinge in this area (apparently there is a Porsche service bulletin about this) while the posterior (outer) brake pad surface would be too far from the outside edge of the friction ring. Shimming out the caliper properly aligns the brake pad surface and friction ring for optimal performance.

I am not certain why the void between the friction ring and hat section exists. If I guessed it would be a function of weight savings and cooling efficiency. What ever the reason for the void it makes the alignment of the brake pad and friction ring more critical for the 997.2 GT3/RS steel rotor than for the 997.1 GT3/RS PCCB rotor (PCCB rotor has more friction ring surface area than the 997.2 GT3/RS steel rotor due mainly to this void).
__________________
Peter National PCA Instructor.
Pics and youtubes ==> Daily driver '10RS white/gold. White OEM RS roll bar, red schroth seat belts, CUP LSD, lip and Gurney, Sharky, V1, K40 laser blocker.

Sold '07GT3 white

Last edited by TRAKCAR; 05-10-2011 at 11:44 PM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:36 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Garage vBulletin Plugins by Drive Thru Online, Inc.
©2010-2018, Porsche Club of America. This site is owned & operated by the Porsche Club of America, and is not affiliated in any way with Porsche AG or Porsche Cars North America.