Go Back   PCA GT2, GT3 and Cup Car SIG Forums > GT2/GT3/Cup Car Register Discussions > GT2, GT3, RS and Cup Car Discussions

GT2, GT3, RS and Cup Car Discussions Discussions on all topics related to all Porsche GT vehicles

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-05-2011, 09:24 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default PCCB wear on GT3 RS

OK I hope this does not become one of those PCCB vs steel brake rotors debate but I am looking for some feedback from some others that like to drive their rs cars.

I just turned 3000 miles on my car, no lie I have 1000 miles of track time. not alot compared to some of you guys but alot for me in 6 months. California speedway, willow springs (big willow), and a few days at Buttonwillow. Total 9 days.

So I have heard horror stories over the cost of the PCCB rotors and that most people advise not to wear the pads below 50%.

So I took my car into the shop and it was determined, from measurements, that my fronts were 60% and the backs were 70%. I feel like I drive pretty aggressive on the track and yes I leave the TC on. Oh and no beveling. I will add pics when I get the car back. The mechanic said my rotors look brand new.

So here is the big question, I am replacing pads with new ones, OEM, at this point unless someone can recommend a better pad. If I just replace the pads before 50% how long can I expect, or how long have others experienced that their rotors will last? Can I expect 5 years with the stock PCCB rotors as long as I stay on top of pad wear?

If so then what is the big deal running the steel rotors?

I am told that replacing the PCCBs is a 12 to 14k proposition and I do want to avoid that.

Comments
Reply With Quote
  #2  
Old 05-06-2011, 12:56 AM
PJS's Avatar
PJS PJS is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Location: Seattle
Posts: 42
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

a wise man once told me that if you get more than 20 hours of actual track time per year then pccb's are a very expensive option

also I believe there was a recent Porsche service bulletin that said that stock pads are the only pads reccomended for use by Porsche... that the p50 motorsport pads are too harsh
__________________
07 RS
11 3500 Denali Duramax
Reply With Quote
  #3  
Old 05-06-2011, 05:08 AM
Izzone's Avatar
Izzone Izzone is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 62
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Switch to steel, brake feel is better and if your ceramics are in good vcondition you can sell for good money still

For some reason (not exactly sure) two RS this year at Sebring with ceramics got ice mode....who knows if the stars aligned or it was the brakes......I wont risk it
__________________
Randy - 997.2 GT3RS
Reply With Quote
  #4  
Old 05-06-2011, 09:59 AM
Trackrat's Avatar
Trackrat Trackrat is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 179
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by PJS View Post
a wise man once told me that if you get more than 20 hours of actual track time per year then pccb's are a very expensive option

also I believe there was a recent Porsche service bulletin that said that stock pads are the only pads reccomended for use by Porsche... that the p50 motorsport pads are too harsh
I concur.
Reply With Quote
  #5  
Old 05-08-2011, 10:14 PM
PJS's Avatar
PJS PJS is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Location: Seattle
Posts: 42
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Wise man was none other than NJ GT and his selfless advice to me in setting up my RS has been invaluable
__________________
07 RS
11 3500 Denali Duramax
Reply With Quote
  #6  
Old 05-08-2011, 11:02 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by PJS View Post
Wise man was none other than NJ GT and his selfless advice to me in setting up my RS has been invaluable
Do tell, whats the secret??
Reply With Quote
  #7  
Old 05-08-2011, 11:15 PM
PJS's Avatar
PJS PJS is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Location: Seattle
Posts: 42
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

The advice has spanned from tire sizing, moton set up, gearing, alignment etc

All stuff I would have figured out eventually on my own but if I can learn from others who have already done it, then that is all the better.

IMHO, that is the absolute best part of these forums.
__________________
07 RS
11 3500 Denali Duramax
Reply With Quote
  #8  
Old 05-09-2011, 09:38 PM
bman's Avatar
bman bman is offline
Registered Porsche Owner
 
Join Date: Feb 2011
Posts: 146
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

If you intend to stick with the PCCB's then stick with the stock pad and just realize you're going to be changing pads more often. Keep an eye on the pad tapering even if you don't think you have a problem. You MUST inspect the pad wear by looking at the lower half of the pad regularly. Mine and every other PCCB track'd car I've seen has had tapered pad wear. Including at '10 GT3 that shared a garage with me at Mid Ohio this weekend. He's tracked his car a lot and came a fraction of an inch away from destroying a rotor due to severe tapering. There was a lot of pad looking at the top of the caliper and practically none on the bottom.
Reply With Quote
  #9  
Old 05-09-2011, 09:56 PM
mooty's Avatar
mooty mooty is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 115
Downloads: 0
Uploads: 0
Garage
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by PJS View Post
Wise man was none other than NJ GT and his selfless advice to me in setting up my RS has been invaluable
why isn't rad on this site yet?
he's a NUT.
met him 2x, great enthusiast!
his wheel/tire recommendation are always right on.
at first you think he's insane stuffing HUGE rubber in there. then you try.... voila..... he's right as usual
Reply With Quote
  #10  
Old 05-09-2011, 10:04 PM
Trackrat's Avatar
Trackrat Trackrat is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 179
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by bman View Post
If you intend to stick with the PCCB's then stick with the stock pad and just realize you're going to be changing pads more often. Keep an eye on the pad tapering even if you don't think you have a problem. You MUST inspect the pad wear by looking at the lower half of the pad regularly. Mine and every other PCCB track'd car I've seen has had tapered pad wear. Including at '10 GT3 that shared a garage with me at Mid Ohio this weekend. He's tracked his car a lot and came a fraction of an inch away from destroying a rotor due to severe tapering. There was a lot of pad looking at the top of the caliper and practically none on the bottom.
Words of wisdom. Must check the leading edges of the pads as bman notes.
Reply With Quote
  #11  
Old 05-09-2011, 10:13 PM
PJS's Avatar
PJS PJS is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Location: Seattle
Posts: 42
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by mooty View Post
why isn't rad on this site yet?
he's a NUT.
met him 2x, great enthusiast!
his wheel/tire recommendation are always right on.
at first you think he's insane stuffing HUGE rubber in there. then you try.... voila..... he's right as usual
335 and 255
:-)

Will meet him one day - drinks on me
__________________
07 RS
11 3500 Denali Duramax
Reply With Quote
  #12  
Old 05-10-2011, 06:36 PM
Izzone's Avatar
Izzone Izzone is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 62
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by PJS View Post
335 and 255
:-)

Will meet him one day - drinks on me
I track with him this Saturday at Sebring....and Peter, Erik ect
__________________
Randy - 997.2 GT3RS
Reply With Quote
  #13  
Old 05-10-2011, 06:51 PM
PJS's Avatar
PJS PJS is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Location: Seattle
Posts: 42
Downloads: 0
Uploads: 0
Default Re: PCCB wear on GT3 RS

tell him that PJ from Seattle says hello
__________________
07 RS
11 3500 Denali Duramax
Reply With Quote
  #14  
Old 05-10-2011, 10:35 PM
mooty's Avatar
mooty mooty is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 115
Downloads: 0
Uploads: 0
Garage
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by PJS View Post
335 and 255
:-)

Will meet him one day - drinks on me
bring big wallet.
rad can drink. i think it was 4 beers over dinner ;-)
Reply With Quote
  #15  
Old 05-10-2011, 11:40 PM
FTS's Avatar
FTS FTS is offline
SIG Advocate
 
Join Date: Feb 2011
Location: Germantown, MD
Posts: 967
Downloads: 12
Uploads: 7
Garage
Default Re: PCCB wear on GT3 RS

Quote:
Originally Posted by mooty View Post
bring big wallet.
rad can drink. i think it was 4 beers over dinner ;-)
4? pffft!
__________________
Fatih Selekler
997.2 GT3
Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 08:25 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Garage vBulletin Plugins by Drive Thru Online, Inc.
©2010-2018, Porsche Club of America. This site is owned & operated by the Porsche Club of America, and is not affiliated in any way with Porsche AG or Porsche Cars North America.