'10 RS Dyno

TRAKCAR · #1 06-17-2011, 07:55 AM

With Sharky and unplugged, so if nything it should be down a bit on torque midrange.

FTS · #2 06-17-2011, 09:16 AM

Woww, those are impressive numbers, how come they that high?

mdrums · #3 06-17-2011, 09:23 PM

FTS....because Reters car knows nothing but Flat Out!

CWS · #4 06-17-2011, 09:58 PM

Torque peak occurs much earlier in RPM range than specs indicate. Can't complain about that.

TRAKCAR · #5 06-19-2011, 09:31 AM

Izzone's dyno'ed his car this weekend and his numbers were about the same.
http://www.youtube.com/user/izzone74?ob=5

jenk12m · #6 06-20-2011, 10:34 AM

I knew there was a reason you would blow by me. Hehe

mdrums · #7 06-25-2011, 10:36 PM

So...what was your break in proceedure....gentle on it till???miles or agressive street driving and then off to the track asap?

TRAKCAR · #8 06-25-2011, 11:23 PM

I picked it up in Tampa and drove it to palm beach trying vary gears and engine speeds as much as possible while staying under 4K RPM. I think I accidentally revved it to about 6K a couple of time is the first 50 miles.

Only very gentle under 2500 with lots of shifting not to bog engine untill engine is hot. I always do that still.

After the first 500 miles I went to Homestead and did 5 laps easy on street tires, the weekend after I went to Sebring short shifting at 7 7.5K RPM. Ran easy 2:23's (On Hoosiers), thinking a 2:19 was in the cards ;-)

Dropped off at Orbit and changed all oils, bled brakes put SRF in, etc. etc.