Go Back   PCA GT2, GT3 and Cup Car SIG Forums > GT2/GT3/Cup Car Register Discussions > GT2, GT3, RS and Cup Car Discussions
Register Forums FAQs Search

GT2, GT3, RS and Cup Car Discussions Discussions on all topics related to all Porsche GT vehicles

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-01-2011, 11:04 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default Center Lock Wheels

I have read so many threads about people complaining about the center lock wheels, what a pain they are, that I have been postponing doing my own wheel swap and brake inspection.

This weekend I pull my wheels off my 11 GT3 RS for the first time. I believe I followed the right procedure by leaving the car in the air while I torqued each wheel to the new track spec of 444 ft lbs. I used the truck brake pedal tool and it was a one man job. Probably took 30 to 40 minutes because I took my time and did one wheel at a time. There was adequate grease on the hub. I made sure the wheel was seated against the hub before torquing in the air. I used the mac tools 4 to 1 torque multiplier and a regular mac tools torque wrench set at 120 lbs because the multiplier info states there could be a 10% to 20% variation.

It was a no brainer. What did I miss?

I do have one question, what jack are most of you using? My car is set at the euro ride height with 18 inch GMG wheels so it sits a bit low and it was a strain to lift the car to slip the jack underneath it, again, one man show.

BTW I love this new forum.

Thanks guys
Reply With Quote
  #2  
Old 05-01-2011, 11:17 PM
FTS's Avatar
FTS FTS is offline
SIG Advocate
 
Join Date: Feb 2011
Location: Germantown, MD
Posts: 967
Downloads: 12
Uploads: 7
Garage
Default Re: Center Lock Wheels

Quote:
Originally Posted by stujelly View Post
BTW I love this new forum.

Thanks guys
This means a lot coming from one of our members, thank you!

As for the jack, I use regular $100 small, light jack sold at every store, but my car is not as low as yours most likely, and it fits with only 5-10 mm clearance. I would imagine you may need to use some wood pieces to put the car one first, or race pads to roll onto first.

On the question of "what did I miss?" Just because you don't mention it:
  • making sure the center lock gears are flush with the wheel center gears.
  • Once you torque the wheels while they are in the air, for tracking purposes, you should do the follow up: bring the car onto the floor, slightly loosen the nut, then retorque to spec.
__________________
Fatih Selekler
997.2 GT3
Reply With Quote
  #3  
Old 05-02-2011, 12:51 AM
mooty's Avatar
mooty mooty is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 115
Downloads: 0
Uploads: 0
Garage
Default Re: Center Lock Wheels

jack: ac hydraulic

usually wheel change is not hard. but if you do it 3x a day trying to maximum tire performance, it's too slow b/c it does'nt allow u to use impact gun.
Reply With Quote
  #4  
Old 05-02-2011, 06:58 PM
jenk12m's Avatar
jenk12m jenk12m is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 170
Downloads: 0
Uploads: 0
Default Re: Center Lock Wheels

Tire rack low profile. Works great
Reply With Quote
  #5  
Old 05-02-2011, 07:19 PM
TRAKCAR's Avatar
TRAKCAR TRAKCAR is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 359
Downloads: 0
Uploads: 0
Garage
Default Re: Center Lock Wheels

You mean this one?
http://www.tirerack.com/accessories/detail.jsp?ID=67

It does not say low profile? is 3.5" low enough for our cars?
__________________
Peter National PCA Instructor.
Pics and youtubes ==> Daily driver '10RS white/gold. White OEM RS roll bar, red schroth seat belts, CUP LSD, lip and Gurney, Sharky, V1, K40 laser blocker.

Sold '07GT3 white
Reply With Quote
  #6  
Old 05-03-2011, 06:01 PM
Izzone's Avatar
Izzone Izzone is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 62
Downloads: 0
Uploads: 0
Default Re: Center Lock Wheels

I am looking for a aluminum jack for car......have AC for garage

Any reccomendations I will buy it now

Nice but expensive

http://www.asedeals.com/zinko_alumin...ing_jacks.html

Centerlock is no big deal, just different
__________________
Randy - 997.2 GT3RS
Reply With Quote
  #7  
Old 05-03-2011, 06:31 PM
stujelly's Avatar
stujelly stujelly is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 45
Downloads: 0
Uploads: 0
Default Re: Center Lock Wheels

Quote:
Originally Posted by Izzone View Post
I am looking for a aluminum jack for car......have AC for garage

Any reccomendations I will buy it now

Nice but expensive

http://www.asedeals.com/zinko_alumin...ing_jacks.html

Centerlock is no big deal, just different
Wow those are nice but pricey. I have a nice craftsman that I think is about 3 inches in height for about 200 bucks. That extra 3/4 inch lower would work great. I think I will look into that and then put the craftsman in the trailer.

Again thanks for the great info.
Reply With Quote
  #8  
Old 05-03-2011, 07:48 PM
FTS's Avatar
FTS FTS is offline
SIG Advocate
 
Join Date: Feb 2011
Location: Germantown, MD
Posts: 967
Downloads: 12
Uploads: 7
Garage
Default Re: Center Lock Wheels

Woww, one of the most expensive ones I have seen thus far. But think about it, I use my jacks on average 6-8 years, so yearly cost is minimal. Would I pay it then? Nope
__________________
Fatih Selekler
997.2 GT3
Reply With Quote
  #9  
Old 05-04-2011, 06:15 AM
ATL Fahrer ATL Fahrer is offline
Registered PCA Member
 
Join Date: Apr 2011
Location: Atlanta, GA
Posts: 13
Downloads: 0
Uploads: 0
Default Re: Center Lock Wheels

Bought this one http://www.northerntool.com/shop/too...3500_200313500

Cheap and goes down to 3.25"
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 06:02 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Garage vBulletin Plugins by Drive Thru Online, Inc.
©2010-2018, Porsche Club of America. This site is owned & operated by the Porsche Club of America, and is not affiliated in any way with Porsche AG or Porsche Cars North America.