Go Back   PCA GT2, GT3 and Cup Car SIG Forums > GT2/GT3/Cup Car Register Discussions > GT2, GT3, RS and Cup Car Discussions
Register Forums FAQs Search

GT2, GT3, RS and Cup Car Discussions Discussions on all topics related to all Porsche GT vehicles

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 05-10-2011, 02:10 AM
IPB-Autosport's Avatar
IPB-Autosport IPB-Autosport is offline
PCA Member (Vendor Rep.)
 
Join Date: May 2011
Posts: 18
Downloads: 0
Uploads: 0
Default IPB-Autosport 996 GT3 4 Liter

While many are scrambling to find an RS 4.0 allocation, we are taking a different approach. Allow me to introduce the IPB-Autosport 4 liter project.

Click the image to open in full size.
Click the image to open in full size.

First things first, the engine has to come out. After removing the airbox, draining and disconnecting the coolant system, evacuating the A/C, disconnecting power steering lines, fuel lines, engine harness, misc vacuum lines, etc, the car goes up in the air.

Click the image to open in full size.

Once the plastic underbody panels are removed, we gain access to everything else that has to be disconnected: axles, cross members, sway bar, starter, ground, transmission cables, clutch slave, additional coolant lines including the tranny cooler, and of course engine/transmission mounts. The whole unit drops out.

Click the image to open in full size.

It’s massive.

Click the image to open in full size.

The engine and transmission is split and the clutch is removed. Stock flywheel isn’t light. An RS LWFW will be taking its place.

Click the image to open in full size.

Clutch plate still looks good.

Click the image to open in full size.

Two studs are pulled and the engine is secured with allens.

Click the image to open in full size.
Click the image to open in full size.

Out comes the oil tank and associated lines.

Click the image to open in full size.
Click the image to open in full size.

Next the intake manifold.

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

Oil cooler and cooling manifold come out.

Click the image to open in full size.
Click the image to open in full size.

Alternator and A/C compressor comes next.

Click the image to open in full size.

Power steering pump and reservoir.

Click the image to open in full size.

Water pump comes out last.

Click the image to open in full size.

We are down to a long block.

Click the image to open in full size.

All the parts are stashed on a cart, and the transmission sits nearby. Once the case is split and sent off to machining, the differential will be pulled and rebuilt with Guard internals.

Click the image to open in full size.

In the engine room is a freshly rebuild air cooled engine waiting to go into a genuine 914-6. Numerous flat-6 engine parts everywhere – accumulated through years of engine building experience.

Click the image to open in full size.

My engine is next to a 993 GT2 Evo 3.8. Cool, huh?

Click the image to open in full size.

We need more motivation in this room. Ah yes, the Wurth calendar!

Click the image to open in full size.

Cam covers come off with the motivation of big orange.

Click the image to open in full size.
Click the image to open in full size.

Out come the chain tensioners.

Click the image to open in full size.

Porsche specialty tools are used to hold the cam gears in order to loosen the nuts.

Click the image to open in full size.

Lifters are now exposed. These are placed into a labeled bin so that they can be reused in the same locations.

Click the image to open in full size.

Timing chain housings and cam housings come out.

Click the image to open in full size.

Then the heads.

Click the image to open in full size.

Parts lay on the work table.

Click the image to open in full size.
Click the image to open in full size.

Cylinders slide off exposing the pistons.

Click the image to open in full size.
Click the image to open in full size.

Pistons are unclipped.

Click the image to open in full size.
Click the image to open in full size.

Time to split the case.

Click the image to open in full size.

The engine stand is struck with a hammer to shock the case.

Click the image to open in full size.
Click the image to open in full size.

The internals are beautiful.

Click the image to open in full size.

That's all for tonight - the past few days have been exhausting!
__________________

Reply With Quote
  #2  
Old 05-10-2011, 02:36 AM
FTS's Avatar
FTS FTS is offline
SIG Advocate
 
Join Date: Feb 2011
Location: Germantown, MD
Posts: 967
Downloads: 12
Uploads: 7
Garage
Default Re: IPB-Autosport 996 GT3 4 Liter

I have to say, love the post, pics and story development, thank you. This is pure car porn, like undressing your significant other on a pole

Thank you for the detail pictures, fantastic to see all these details.

Also, just as a note to everyone, these types of posts are very educational for most of us, and as long as vendors (who are enthusiasts like us) keep sharing technical information with the community and avoid engaging in direct sales activities, such as listing prices for products or services, or just trying free advertising, I welcome their participation in our community. It is a fine line, and we will do our best to walk on it carefully. If you have a differing view on this matter, please do email/pm me privately, at the end this is your community, we are only here to administer it for our members.

Cheers,
__________________
Fatih Selekler
997.2 GT3

Last edited by FTS; 05-10-2011 at 02:41 AM.
Reply With Quote
  #3  
Old 05-10-2011, 05:33 AM
landjet's Avatar
landjet landjet is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 60
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Ron, nice project. How many HP will the 4.0 yield?

Do you have any pictures of the coolant manifolds after repair using your method of welding in the stock fittings?
Reply With Quote
  #4  
Old 05-10-2011, 12:31 PM
TRAKCAR's Avatar
TRAKCAR TRAKCAR is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 359
Downloads: 0
Uploads: 0
Garage
Default Re: IPB-Autosport 996 GT3 4 Liter

Me Likey!

Can't wait to see the progress, dyno results and laptimes. Ideally with before and after overlays. That's all.
__________________
Peter National PCA Instructor.
Pics and youtubes ==> Daily driver '10RS white/gold. White OEM RS roll bar, red schroth seat belts, CUP LSD, lip and Gurney, Sharky, V1, K40 laser blocker.

Sold '07GT3 white
Reply With Quote
  #5  
Old 05-10-2011, 12:33 PM
Trackrat's Avatar
Trackrat Trackrat is offline
Vice Advocate
 
Join Date: Feb 2011
Posts: 179
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Following with curiosity as well.
Reply With Quote
  #6  
Old 05-10-2011, 12:56 PM
cfjan's Avatar
cfjan cfjan is offline
Registered Porsche Owner
 
Join Date: May 2011
Posts: 9
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

The one done by Musante/EPL ended up making 450hps or so? Here's the link to the EPL website:

http://www.eplabs.net/products/porsc...onversion-kit/
Reply With Quote
  #7  
Old 05-10-2011, 01:11 PM
IPB-Autosport's Avatar
IPB-Autosport IPB-Autosport is offline
PCA Member (Vendor Rep.)
 
Join Date: May 2011
Posts: 18
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

I will be posting pics of each step along the way, as well as pics of all enhancements to improve reliability.
__________________

Reply With Quote
  #8  
Old 05-10-2011, 09:24 PM
landjet's Avatar
landjet landjet is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 60
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Thanks, I will be following. Everything has to come off the top of my engine to do the coolant manifold repair.
Reply With Quote
  #9  
Old 05-11-2011, 08:54 AM
SH || NC's Avatar
SH || NC SH || NC is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 129
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Quote:
Originally Posted by FTS View Post
Also, just as a note to everyone, these types of posts are very educational for most of us, and as long as vendors (who are enthusiasts like us) keep sharing technical information with the community and avoid engaging in direct sales activities, such as listing prices for products or services, or just trying free advertising, I welcome their participation in our community.
+1!

Can't wait to see the next batch of updates!
__________________
GT3 & TT Owners - Fix Your Fittings! (link) (link) (link) (link)

Reply With Quote
  #10  
Old 05-11-2011, 10:26 AM
Dell's Avatar
Dell Dell is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 79
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Saw it over on Rennlist. Will follow here as well. SUBSCRIBED!
Reply With Quote
  #11  
Old 05-11-2011, 11:28 PM
IPB-Autosport's Avatar
IPB-Autosport IPB-Autosport is offline
PCA Member (Vendor Rep.)
 
Join Date: May 2011
Posts: 18
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Oil pump and shaft are out.

Click the image to open in full size.
Click the image to open in full size.

Note the dual pick-ups on the oil pump.

Click the image to open in full size.

Crank comes out with the rods.

Click the image to open in full size.
Click the image to open in full size.

All bearings are pulled and a bare case half remains on the engine stand.

Click the image to open in full size.

Sleeves are pounded out with a rubber mallet out of the cylinders.

Click the image to open in full size.

Case and cylinders are pressure washed. Nice and shiny. Although, getting all the cosmoline off the exterior will take additional effort.

Click the image to open in full size.
Click the image to open in full size.

Here’s the interesting part. Note the recesses in the cylinders to accommodate the coolant. The sleeves maintain an opposite profile. When the machinist bores out the sleeve mating surfaces for the larger 4 liter sleeves (at the tops and bottoms), the rough cast surface will also need to be bored to maintain an adequate coolant passage and prevent flow restriction. The 2 rubber gaskets in the cylinders prevent the coolant and oil from mixing. An additional gasket is located at the top of the sleeve.

Click the image to open in full size.
Click the image to open in full size.
__________________


Last edited by IPB-Autosport; 05-13-2011 at 06:23 PM.
Reply With Quote
  #12  
Old 05-12-2011, 08:46 AM
FTS's Avatar
FTS FTS is offline
SIG Advocate
 
Join Date: Feb 2011
Location: Germantown, MD
Posts: 967
Downloads: 12
Uploads: 7
Garage
Default Re: IPB-Autosport 996 GT3 4 Liter

I am first to admit I don't understand engines, a big mistery to me. All these parts coming together precisely to work at 8500 RPM reliably for thousands of miles, amazing engineering. And not to mention brave souls pulling it apart to redo, my hats off to you
__________________
Fatih Selekler
997.2 GT3
Reply With Quote
  #13  
Old 05-16-2011, 09:36 PM
FFaust's Avatar
FFaust FFaust is offline
Registered Porsche Owner
 
Join Date: Apr 2011
Posts: 37
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Nice, waiting for the rest.
Reply With Quote
  #14  
Old 05-20-2011, 12:01 AM
IPB-Autosport's Avatar
IPB-Autosport IPB-Autosport is offline
PCA Member (Vendor Rep.)
 
Join Date: May 2011
Posts: 18
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

An old 930 flywheel is bolted up to the crank so we can place it into a vice and remove the con rods.

Click the image to open in full size.

Out they go.

Click the image to open in full size.

Bare crank.

Click the image to open in full size.

While we are waiting for pistons and sleeves to be shipped, we start working on the gearbox. Onto the stand it goes.

Click the image to open in full size.
Click the image to open in full size.

Drain plug is pulled and oil drained. Looks like it’s doing its job.

Click the image to open in full size.

Output shafts are pulled.

Click the image to open in full size.
Click the image to open in full size.

So is the differential cover. LSD is out and you can see the huge pinion gear .

Click the image to open in full size.

We are ordering LSD rebuild parts from the now world-known Guard Transmission. LSD will be rebuilt once we receive parts from Matt.

Click the image to open in full size.
__________________

Reply With Quote
  #15  
Old 05-24-2011, 11:53 PM
IPB-Autosport's Avatar
IPB-Autosport IPB-Autosport is offline
PCA Member (Vendor Rep.)
 
Join Date: May 2011
Posts: 18
Downloads: 0
Uploads: 0
Default Re: IPB-Autosport 996 GT3 4 Liter

Pistons and cylinder sleeves (left) for the 4 liter conversion are finally in. Mahle 105.4mm pistons, steel cylinder sleeves out of the UK from a Formula 1 supplier, stronger wrist pins, and Mahle ring sets. Pistons and sleeves were developed and sold by Wrightwood Racing in Southern California.

Click the image to open in full size.

One look at the new piston (left) and you know it’s all business.

Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.


The 4 liter sleeves are a work of art themselves. They are finned in the cooling channels to provide greater surface area for heat conduction. More power requires better cooling.

Click the image to open in full size.
Click the image to open in full size.

Wrist pins are heavy duty.

Click the image to open in full size.

Piston rings from Mahle. Only the best here.

Click the image to open in full size.

The case and cylinder housings go for machining this Thursday at How Tek in Cameron Park. The owner, Howard, was the machinist for Comptech racing.

Meanwhile, we are waiting for new clutches from Guard Transmission to rebuild the limited slip differential.
__________________


Last edited by IPB-Autosport; 05-25-2011 at 09:37 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -5. The time now is 12:26 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Garage vBulletin Plugins by Drive Thru Online, Inc.
©2010-2018, Porsche Club of America. This site is owned & operated by the Porsche Club of America, and is not affiliated in any way with Porsche AG or Porsche Cars North America.